Graco Husky 1050 1″ Air Operated Diaphragm Pump
Model No: 649398
Husky 1050 Operation 312877EN-R
Our 1 inch (25.4 mm) Husky 1050 pneumatic double diaphragm pumps feature a stall-free, low pulsation air valve which provides a smooth and rapid changeover. Available in aluminum, polypropylene, conductive polypropylene, PVDF, stainless steel and hastelloy fluid sections.
View values in U.S. units.
| Husky 1050 Air-Operated Diaphragm Pump | |
| Maximum fluid working pressure | 125 psi
8.6 bar, 0.86 MPa |
| Air pressure operating range | 20-125 psi
1.4-8.6 bar, 0.14-0.86 MPa |
| Fluid displacement per cycle | 0.17 gal
0.64 l |
| Air consumption | 25 scfm at 70 psi, 20 gpm
0.7 m³/min at 4.8 bar, 0.48 MPa, 76 lpm |
| Maximum values with water as media under submerged inlet conditions at ambient temperature: | |
| Maximum air consumption | 67 scfm
1.9 m³/min |
| Maximum free-flow delivery | 50 gpm
189 lpm |
| Maximum pump speed | 280 cpm
280 cpm |
| Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables) | 16 ft dry, 29 ft wet
4.9 m dry, 8.8 m wet |
| Maximum size pumpable solids | 1/8 in
3.2 mm |
| Recommended cycle rate for continuous use | 93 – 140 cpm
93 – 140 cpm |
| Recommended cycle rate for circulation systems | 20 cpm
20 cpm |
| Sound Power* | |
| at 70 psi (4.8 bar, 0.48 MPa) and 50 cpm | 78 dBa
78 dBa |
| at 100 psi (7.0 bar, 0.7 MPa) and full flow | 90 dBa
90 dBa |
| Sound Pressure** | |
| at 70 psi (4.8 bar, 0.48 MPa) and 50 cpm | 84 dBa
84 dBa |
| at 100 psi (7.0 bar, 0.7 MPa) and full flow | 96 dBa
96 dBa |
| Fluid temperature range | See Manual
See Manual |
| Air inlet size | 1/2 npt(f)
1/2 npt(f) |
| Fluid inlet size | |
| Aluminum (1050A), Hastelloy (1050H) or Stainless Steel (1050S) | 1 in npt(f) or 1 in bspt
1 in npt(f) or 1 in bspt |
| Conductive Poly (1050C), Polypropylene (1050P), or PVDF (1050F) | 1 in raised face ANSI/DIN flange
1 in raised face ANSI/DIN flange |
| Fluid outlet size | |
| Aluminum (1050A), Hastelloy (1050H) or Stainless Steel (1050S) | 1 in npt(f) or 1 in bspt
1 in npt(f) or 1 in bspt |
| Conductive Poly (1050C), Polypropylene (1050P), or PVDF (1050F) | 1 in raised face ANSI/DIN flange
1 in raised face ANSI/DIN flange |
| Weight | |
| Aluminum (1050A) | 23 lb
10.5 kg |
| Conductive Polypropylene (1050C) and Polypropylene (1050P) | 18 lb
8.2 kg |
| Hastelloy (1050H) | 41 lb
18.6 kg |
| PVDF (1050F) | 26 lb
11.8 kg |
| Stainless Steel (1050S) with conductive polypropylene center | 36.3 lb
16.5 kg |
| Stainless Steel (1050S) with polypropylene center | 37.3 lb
16.9 kg |
| Stainless Steel (1050S) with aluminum center | 41.4 lb
18.8 kg |
| Wetted parts include material(s) chosen for seat, ball, and diaphragm options, plus the pump’s material of construction | |
| 1050A | Aluminum
Aluminum |
| 1050H | Hastelloy
Hastelloy |
| 1050C and 1050P | Polypropylene
Polypropylene |
| 1050F | PVDF
PVDF |
| 1050S | Stainless Steel
Stainless Steel |
| Non-wetted external parts | |
| Aluminum (1050A) | aluminum, coated carbon steel
aluminum, coated carbon steel |
| Hastelloy (1050H) | hastelloy, stainless steel, polypropylene or aluminum (if used in center section)
hastelloy, stainless steel, polypropylene or aluminum (if used in center section) |
| Plastic (1050P, 1050C, and 1050F) | stainless steel, polypropylene
stainless steel, polypropylene |
| Stainless Steel (1050S) | stainless steel, polypropylene or aluminum (if used in center section)
stainless steel, polypropylene or aluminum (if used in center section) |
| Reference Information | |
| Maximum Storage Time (varies with conditions) | 2 years
2 years |
| Maximum Lifetime (varies with operating conditions and maintenance) | 10 years
10 years |
| Power Efficiency Factor (varies based on pump configuration, operating parameters, and material) | 1.61 gal air consumed/1 gal fluid pumped at 70 psi
1.61 l air consumed/1 l fluid pumped at 4.8 bar |
| * Sound power measured per ISO-9614–2. ** Sound pressure was tested 3.28 ft (1 m) from equipment. All trademarks mentioned in this manual are the property of their respective owners. | |
We are dedicated to providing our customers with a quality service…every time!
To make an enquiry or send us your feedback: please fill out our contact form, give us a call or send us an email.
By submitting this form, you accept that Fluid Equipment Services Ltd will process and use your data. We may also send you further marketing communications, in relation to FES and our services, via email.
Fluid Equipment Services Ltd are committed to respecting the privacy and security of your personal data, which we will keep secure. It is only obtained when you voluntarily choose to send it to us.
